Rod cap bolt torque
03-27-2020, (Subject: Rod cap bolt torque ) 
Post: #1
Rod cap bolt torque
What are you guys doing to get the “60 degrees” accurately [/font]for final torque on the rod cap bolts? 180 was easy enough to mark on the mains, but how did you accurately mark 60 degrees on the rod cap bolts?? Thanks


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply
03-27-2020, (Subject: Rod cap bolt torque ) 
Post: #2
RE: Rod cap bolt torque
60-degrees is the rotation of one flat-side to the next on a 6-point bolt head, or 2-flats on a 12-point bolt head.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: JMBT , tree98 , hhow55
03-27-2020, (Subject: Rod cap bolt torque ) 
Post: #3
RE: Rod cap bolt torque
perfect! thanks Rawze


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.