Shim for increased Oil Pressure

[Hammerhead]

(07-19-2016 )Camstyn Wrote:  ...
Sorry Hammerhead, not trying to derail your thread!

No worries Camstyn, it's all related. Discussion leads to idea sharing and that's all progress.
Rawze produces Technical Documents, I, Hammer, thinks about a problem or issue, I try to correct it, post what I did, how I did it, what tools were required, what my results were, and most importantly if I learn something that I feel is valuable, I emphasize it so that others can learn from my experiences.
In the end it's all progress of knowledge, and that's the goal.