Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Shim for increased Oil Pressure

new reply
Shim for increased Oil Pressure
08-10-2016, (Subject: Shim for increased Oil Pressure ) 
Post: #47
Hammerhead Offline
Kookoo for Cocoa Puffs  (1918 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1918 thank(s) in 738 post(s)
RE: Shim for increased Oil Pressure
This is the deburring tool I keep referring to. Place the end inside a tube, pipe, or hole and put the curve at the angle to the sharp edge and apply circular pressure to make a nice smooth radiused edge.

./uploads/201608/post_2077_1470853308_d69ff2232796b2aca0d6a93e358bdd14.jpeg

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Shim for increased Oil Pressure - Unilevers - 07-31-2016,
RE: Shim for increased Oil Pressure - Hammerhead - 08-10-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication