Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / 2010 VOLVO W/ISX450

new reply
2010 VOLVO W/ISX450
03-28-2020, (Subject: 2010 VOLVO W/ISX450 ) 
Post: #3
Rawze Offline
Forum Reject  (13931 Likes)  *******

 		Posts: 11,038
Joined: Jun 2013
Thanks: 5897
Given 13931 thank(s) in 6088 post(s)
RE: 2010 VOLVO W/ISX450
yes, it is due for a rod and main bearing set.

Overhead valve adjustments should be done every 250k miles. If it has been that long or longer, it is well due for that too.

Crank shaft damper is well due to be replaced as well to prevent excess vibration, wiring and ecm problems, etc. too

the list is actually long for things that should be done for both the engine and the truck overall as it reaches 800k miles.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: JMBT
new reply


Messages In This Thread
2010 VOLVO W/ISX450 - volvo126 - 03-28-2020,
RE: 2010 VOLVO W/ISX450 - Rawze - 03-28-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication