Detroit 12.7 care and maintenance
06-09-2021, (Subject: Detroit 12.7 care and maintenance ) 
Post: #10
RE: Detroit 12.7 care and maintenance
I saw that the power wire to the ecm was mentioned, but make sure that ground that is factory spliced from 4 down to 1 and the hooks to the battery is clean and strong, my 97 9400 has had so many crank but not starts since the day I bought it back in 2011 that any time now it sits for more than a month I check and clean it before I even try to fire her up.....she starts every time now.....the pos is my backup I put maybe a 1k mi a year just to keep bearings and seals good, has 1,2xx,xxx and other than overheads every 100k and oil every 10k I've never touched her in 500k
replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication