Leaking output shaft seal

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 05-15-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Leaking output shaft seal

08-23-2020, (Subject: Leaking output shaft seal )

Post: #7

Rawze

Offline

Forum Reject (13932 Likes)

Posts: 11,040
Joined: Jun 2013

Thanks: 5899
Given 13932 thank(s) in 6089 post(s)

RE: Leaking output shaft seal

Most rear axle yoke nuts are in the range of 800 to as much as 1270 ft-lbs on some of them. A person should have a proper tool that is designed to go this high ... look it up in the service manual for the proper spec to be sure.

here is a really nice puller for yokes, etc... and such. It also is just big enough to fit onto the crank shaft damper of an ISX and pull it.
https://amzn.to/3grh5Oy

arms can be flipped to pull inner races of hub bearing too.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

Thanks given by:

JMBT , Volvo8873 , Meanwhile

« Next Oldest | Next Newest »

Messages In This Thread

Leaking output shaft seal - Meanwhile - 08-22-2020,

RE: Leaking output shaft seal - Chamberpains - 08-22-2020,

RE: Leaking output shaft seal - Meanwhile - 08-22-2020,

RE: Leaking output shaft seal - JMBT - 08-22-2020,

RE: Leaking output shaft seal - Meanwhile - 08-22-2020,

RE: Leaking output shaft seal - kozakvod - 08-23-2020,

RE: Leaking output shaft seal - Rawze - 08-23-2020

RE: Leaking output shaft seal - flatbed94kid - 08-24-2020,

RE: Leaking output shaft seal - Meanwhile - 08-24-2020,

RE: Leaking output shaft seal - Chamberpains - 08-24-2020,

RE: Leaking output shaft seal - Waterloo - 08-24-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design