Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Anyone get code 1911 for cm2250?

new reply
Anyone get code 1911 for cm2250?
07-21-2016, (Subject: Anyone get code 1911 for cm2250? ) 
Post: #18
Rawze Offline
Forum Reject  (13927 Likes)  *******

 		Posts: 11,028
Joined: Jun 2013
Thanks: 5896
Given 13927 thank(s) in 6085 post(s)
RE: Anyone get code 1911 for cm2250?
(07-21-2016 )jimeneztrans84 Wrote:  ...
But it still Cuts off for a split second when taking off and shifting to 9th gear or when driving on 10th.
...

There is a protection in the ECM for overpressure/sudden fuel temp change that will make truck feel like you let go of the throttle for a split second, than back. If you are pressing hard on the throttle and the truck/fuel is not fully warmed up yet, this protection will kick in to prevent over-pressure of the rail.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Anyone get code 1911 for cm2250? - Rawze - 07-21-2016
RE: Anyone get code 1911 for cm2250? - Unilevers - 07-21-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication