CM870 loosing coolant/possible inflame
11-19-2020, (Subject: CM870 loosing coolant/possible inflame ) 
Post: #10
RE: CM870 loosing coolant/possible inflame
(11-19-2020 )Koren Wrote:  Thanks for the replies. All of the pulleys spins fine. But I can't manually spin the crankshaft.
I tried to set up with Haggai but they are busy till December 7. I'm stopping driving at this time but I'm afraid I have to find a shop first since it probably won't start at all after I leave it for a couple of days.
Any shops you guys can recommend in GA/FL area who does an inframe?

How do I pull out the copy of the software of the ECM?

Just wait for haggai.. Theyre they only shop that is close to you that will build it right!
replyreply
 Thanks given by: tree98 , hhow55 , Volvo8873 , Waterloo , Rawze
11-19-2020, (Subject: CM870 loosing coolant/possible inflame ) 
Post: #11
RE: CM870 loosing coolant/possible inflame
^^^^^^^ what he said ^^^^^^

You'll regret it otherwise trust me.


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
 Thanks given by: hhow55
11-19-2020, (Subject: CM870 loosing coolant/possible inflame ) 
Post: #12
RE: CM870 loosing coolant/possible inflame
Go to Haggai


User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person
replyreply
11-19-2020, (Subject: CM870 loosing coolant/possible inflame ) 
Post: #13
RE: CM870 loosing coolant/possible inflame
x4!!!! ^^^^^


User's Signature: Born and raised in Vyskonsin on milk, cheese, bread, and beer!
replyreply
 Thanks given by: hhow55 , Rawze
11-20-2020, (Subject: CM870 loosing coolant/possible inflame ) 
Post: #14
RE: CM870 loosing coolant/possible inflame
Mr. HAGG will take care of you right and you're not that far. I went all the way from Illinois to see him. Well worth it.
replyreply
 Thanks given by: Rawze




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.