(11-11-2021 )Rawze Wrote: (11-10-2021 )Diver Wrote: ...
It’s in a Kenworth t680 2015. The original engine was a paccar don’t have a clue on that ser# as the Cummins was in it when I purchased it. And I believe that the ECM came from a different engine as well sorry I’m not much help here.and yes the 79597170 is what’s in the truck now
wow, that sounds like a complete clustered-Mess!
.. that enigne ser# comes back as a CM2250 engine.
-- I can also assume that the truck / engine is "Deleted"?.. other wise, THE ENTIRE EMISSIONS SYSTEMS THAT BELONGED TO THE CM2250 ENGINE NEEDS TO ALSO BE INSTALLED TO MATCH THE ENGINE TO MAKE IT LEGAL!... AND THEN REGISTERED AS A "GLIDER", AS IT IS A 2015 TRUCK with a non-compliant (2010 emissions standards) engine in it!.. .. so this tells me clearly that it is already a "deleted" truck and engine.
NEXT:;;.... A CM2250 ECM NEEDS TO BE PUT BACK ON THAT ENGINE!!!.. PERIOD!. The program needed should match the engine ser# as well. (program CL10138). This is the proper thing to do and what needs to be done to run it correctly.
-== And since it most likely needs "deleted" after, then that is easily cured by simply copying out and e-mailing the factory clean program so that it can be "de-mandated" properly instead of having some rip-off delete tuning idiot making things worse for several thousands of $$$.
WHO MADE THIS MESS BY THE WAY?/... I sure hope like h#ell that it was not a "certified" oem repair shop.. because what they did WAS ESSENTIALLY ILLEGAL (unless they put all the 2010 emissions systems on it too and registered it as a glider). it was not the best idea to use an outdated emissions engine in a 2015 truck to begin with... THEN to make it worse yet ... TO USE THE WRONG ECM!!>??q!.. What a mess!
okay to answer your questions as best I can.....No the truck is not deleted it has a full def/dpf system on and runs what I can say as it should. what or where it came from is beyond my knowledge. and as far as the ECM I'm not even sure where they got it from. now I do not have insite but I have access to someone that does. so if there is files or more information that is needed for this to be right then I will have to get with him and have him download the files for you to look at if you need that to see what is in there. and to who did this...…Truck Nation in Houston Tx. is the company that buys and sells lots of trucks.... I don't know if there are an oem shop. Now how do i check to see if its been registered as a glider?
