Mechanic didn't torque the bolts properly $7000 in repairs |
02-12-2021, (Subject: Mechanic didn't torque the bolts properly $7000 in repairs ) Post: #6 | |||
| |||
RE: Mechanic didn't torque the bolts properly $7000 in repairs (02-12-2021 )Sergiu Wrote: Newton Bros replaced the spacer plate, cap screws, o rings, gaskets, inspected the gears and installed everything back. But during a test drive the engine was making a grinding noise above 1300 rpm, and the gauge that measures intake manifold air pressure was climbing in increments not in a fluid natural manner as it was before. At this moment they don't know what's the reason of that noise. Any ideas ? yeah ,.... run away as fast as you can and find someone who knows how to work on cummins engines instead. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Mechanic didn't torque the bolts properly $7000 in repairs - Sergiu - 01-16-2021, RE: Mechanic didn't torque the bolts properly $7000 in repairs - tree98 - 01-16-2021, RE: Mechanic didn't torque the bolts properly $7000 in repairs - Sergiu - 02-12-2021, RE: Mechanic didn't torque the bolts properly $7000 in repairs - Rawze - 02-12-2021 RE: Mechanic didn't torque the bolts properly $7000 in repairs - Sergiu - 02-12-2021, RE: Mechanic didn't torque the bolts properly $7000 in repairs - Nilao - 02-12-2021, RE: Mechanic didn't torque the bolts properly $7000 in repairs - Rawze - 02-12-2021, RE: Mechanic didn't torque the bolts properly $7000 in repairs - Sergiu - 02-12-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.