Friend with a CM870 having issues
04-22-2021, (Subject: Friend with a CM870 having issues ) 
Post: #8
RE: Friend with a CM870 having issues
(04-22-2021 )hookliftpete Wrote:  If you try, it could be very hard to loosen the fitting on the manifold, will needs lots of heat and patience.

when they get real bad, cutting the pipe off at the fitting and using a 6-point socket on it, working it a little at a time after getting it glowing dull red with a torch always works. ... then just put a whole new cross-pipe on there from the stealers#it when it needs to go back together.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: hookliftpete , Chamberpains


Messages In This Thread
RE: Friend with a CM870 having issues - Rawze - 04-22-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.