International 9200 Issue
04-30-2021, (Subject: International 9200 Issue ) 
Post: #1
International 9200 Issue
      My 2007 International 9200 just did this and never seen anything like this before. Truck appears to be running fine, tried shutting it off and cycling the key and cranked up but didn’t help. Added pic below. Thanks for any help.
replyreply
04-30-2021, (Subject: International 9200 Issue ) 
Post: #2
RE: International 9200 Issue
What???? The speedometer needle??


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
04-30-2021, (Subject: International 9200 Issue ) 
Post: #3
RE: International 9200 Issue
Yes it quit working and threw a check engine lighting
replyreply
04-30-2021, (Subject: International 9200 Issue ) 
Post: #4
RE: International 9200 Issue
Check your speedo sensor on the output shaft on the transmission. It's probably the wires, plug in to the sensor or the sensor itself are bad or broken or pinched.
replyreply
04-30-2021, (Subject: International 9200 Issue ) 
Post: #5
RE: International 9200 Issue
Try slowing down... Lol


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
 Thanks given by: tree98
04-30-2021, (Subject: International 9200 Issue ) 
Post: #6
RE: International 9200 Issue
Also, why is your voltage gauge above 14Volts. That seems a bit high if you ask me.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.