De-Mandated CM870
05-04-2021, (Subject: De-Mandated CM870 ) 
Post: #25
RE: De-Mandated CM870
(05-04-2021 )Rawze Wrote:  .. Are you using an aftermarket pyro sensor with its own probe? or are you looking at what the ecm is reporting (factory gauge without a separate sensor)?. The ecm often gets the data wrong and cannot be trusted.

I have two post turbo sensors. One is factory and the other is digital. The digital gauge always reads 100 degrees less than the stock instrument gauge
replyreply


Messages In This Thread
De-Mandated CM870 - AK Trucker - 05-04-2021,
RE: De-Mandated CM870 - Ricky - 05-06-2021,
RE: De-Mandated CM870 - Rawze - 05-07-2021,
RE: De-Mandated CM870 - Rawze - 05-04-2021,
RE: De-Mandated CM870 - Rawze - 05-04-2021,
RE: De-Mandated CM870 - AK Trucker - 05-04-2021
RE: De-Mandated CM870 - Rawze - 05-04-2021,
RE: De-Mandated CM870 - Rawze - 05-04-2021,
RE: De-Mandated CM870 - JimT - 05-05-2021,
RE: De-Mandated CM870 - Rawze - 05-04-2021,
RE: De-Mandated CM870 - Rawze - 05-04-2021,
RE: De-Mandated CM870 - Rawze - 05-04-2021,
RE: De-Mandated CM870 - Rawze - 05-08-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.