X15 fuel not priming
02-27-2024, (Subject: X15 fuel not priming ) 
Post: #1
X15 fuel not priming
Hello guys, I’ve been surprised today. Truck is Kenworth T680 Cummins X15. After changing fuel filters (as usual, just regular PM) fuel system stop priming. Fuel filter Fleet guard FF5825NN, fuel water separator Paccar K37-1021, I always install that filters, bought from official stealership kenworth. Electrical fuel pump works like usual (I hear the sound), but after several cycles both filters is dry. No fuel at all. Any suggestions? Thanks in advance.
replyreply
02-28-2024, (Subject: X15 fuel not priming ) 
Post: #2
RE: X15 fuel not priming
some guesses...

(most common issue)>fuel-water separator gasket did not seal properly?

primer pump failed?.

Sucking air somewhere?.

its anyone's guess.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Maksdriver
02-28-2024, (Subject: X15 fuel not priming ) 
Post: #3
RE: X15 fuel not priming
Yes, Rawze you’re right. Problem is solved. There crack on separator plastic cup, barely visible… after I replaced it, fuel start running from first cycle. And your amendments on my calibration amazing - engine running so smooth! Thank you very much, God bless you!
replyreply
 Thanks given by: Rawze




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.