VGT TURBO ACTUATOR INSTALL FAILS
05-16-2021, (Subject: VGT TURBO ACTUATOR INSTALL FAILS ) 
Post: #6
RE: VGT TURBO ACTUATOR INSTALL FAILS
(05-16-2021 )BlueTurbo Wrote:  ...
What I have tried was to connect the old one without the ignition on and when I connect to the truck it starts spinning, even though it fails if I want to calibrate it.
...

The new one is obviously a dead stick if the old one makes the 1894 code go inactive.


ALIGN THE OLD ONE LIKE IN THE PIC HERE...
./uploads/202105/post_2_1621207894_158aa05794e8a5241e3d94d7bb7e4e94.png
(Right click the pic and choose "View Image" for a larger image).


FIRST OF ALL... check the travel range of the turbo arm/gear. Make sure the turbo has full travel range. If your not sure, then take a couple top-down close-up pics with it at each end of its travel range and post them here.


Inspect turbo and then calibrate actuator using Insite, like shown in my video ...
<iframe id="lbry-iframe" width="560" height="315" src="https://odysee.com/$/embed/isx-inspecting-and-replacing-your-turbo/bd980df4368c3470544b0cf02c446df94ca24ebb?r=8p8MjqctPT8PafuYA5mftGueGF8L3how" allowfullscreen></iframe>


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Techmech


Messages In This Thread
RE: VGT TURBO ACTUATOR INSTALL FAILS - Rawze - 05-16-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.