CM870 power loss
05-18-2021, (Subject: CM870 power loss ) 
Post: #8
RE: CM870 power loss
(05-17-2021 )Nilao Wrote:  Put 60 psi regulated into the actuator on the side of the turbo. Check it for full range of travel. Quick serve should have the specs for full travel measurements.

I took the air line off to the actuator and tried to move it by hand but it wouldn’t move so I put air pressure to it and it moved a good amount but I didn’t hear the turbo once the rod moved down.
replyreply


Messages In This Thread
CM870 power loss - Redland1 - 05-17-2021,
RE: CM870 power loss - Nilao - 05-17-2021,
RE: CM870 power loss - Rawze - 05-17-2021,
RE: CM870 power loss - Nilao - 05-17-2021,
RE: CM870 power loss - Redland1 - 05-18-2021
RE: CM870 power loss - Nilao - 05-18-2021,
RE: CM870 power loss - Rawze - 05-20-2021,
RE: CM870 power loss - Nilao - 05-20-2021,
RE: CM870 power loss - Rawze - 05-20-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.