Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / CM870 power loss

new reply
CM870 power loss
05-20-2021, (Subject: CM870 power loss ) 
Post: #12
Contributing V.I.P.Chamberpains Offline
Contributing V.I.P.  (2773 Likes)  ****

 		Posts: 2,312
Joined: Jan 2018
Thanks: 1172
Given 2773 thank(s) in 1446 post(s)
RE: CM870 power loss
Not if the truck wasn't running. But if the truck was running then yes. If it was running and you heard nothing when the actuator moved then turbo is broke internally.

Take the actuator off the turbo and move the armature on the turbo manually. It should have full travel with very little slight squeaky resistance. If there are any "catch" spots or sticky spots or you don't hear anything sliding in the turbo than there is a problem internally with the turbo.
Return to Top | find
replyreply
 Thanks given by: Rawze , Redland1
new reply


Messages In This Thread
CM870 power loss - Redland1 - 05-17-2021,
RE: CM870 power loss - Nilao - 05-17-2021,
RE: CM870 power loss - Rawze - 05-17-2021,
RE: CM870 power loss - Nilao - 05-17-2021,
RE: CM870 power loss - Nilao - 05-18-2021,
RE: CM870 power loss - Chamberpains - 05-20-2021
RE: CM870 power loss - Rawze - 05-20-2021,
RE: CM870 power loss - Nilao - 05-20-2021,
RE: CM870 power loss - Rawze - 05-20-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication