No Codes! No Lights!

[onebadapple]

Aftertreatment Diesel Particulate Filter Regeneration Analyzer
Parameter Test Results Message
Exhaust Gas Pressure Inspect Exhaust gas pressure is below minimum specification. Refer to Service Procedure.
Turbocharger Speed Inspect Turbocharger speed is below the minimum specification. Refer to Service Procedure.
INSITE 8.7.1.99
Cummins Inc.
Data Log Information
Start Date and Time: 23-Jun-2021,09:20:36.732
Total Log Time: 28:53.5
Source Log Filename: C:\Users\bn431\AppData\Local\Temp\AftertreatmentRegenAnalyzer 06232021-092036.log
Destination Path C:\Intelect\INSITE\Logs
SamplingRate: 500
Comments: Blank/Anything
Customer and Vehicle Information
Customer Name: Customer Name**
Vehicle Unit Number: 392
Engine Information
Model: 6X1u13D1500000000
System Type: ISX12 CM2350 X102/X103/X108/ISX15 CM2350 X101/X104/X109
Serial Number: 79884745
ECM Information
ECM Part Number: 5317106
ECM Code: EF10088.20
Calibration Software Phase: 9280F47

Well for now this is about all I can get to load. With all the times and numbers the file is huge. Tomorrow when I get the reset done I will make SURE I get the regen history. Also, if they have time I’m gonna get another regen analyzer. I don’t think this got to the tier 3 because when this popped up they were done. Raising an eyebrow that a regen analyzer has been done I think five or six times at…now…three different places and all of a sudden I need a new turbo

Thanks!!!