Exhaust brake

[Ricky]

(06-05-2021 )Rawze Wrote:  ...
(for CM870)...
18 is a touch low, depends on the situation, rpm, and load on the engine too. Maybe pressurize the whole engine up to 30 psi using some block plates front and back of turbo, and check for leaks.

...

So Rawze, is there a too much on the boost when jakeing hard. I have heard 20 lbs. Before my inframe my boost didn't get high when using jakes while loaded heavy on steep hills. Since the inframe my jakes work like never before.