Ting / Metallic Sound

[kozakvod]

(06-03-2021 )Rawze Wrote:  

(06-03-2021 )kozakvod Wrote:  BTW, I found the SAME tensioner through PAI for $144 ...

not sure about the tensioner but PAI around here has been known to be nothing but pure engine garbage copmponents... just be fore-warned.

Don't trust those so-called "good reviews"... your drinking the cool-aide on that one.

here is a recent failure seen on one of their garbage dampers. This one was less than 2 years old...





The markings for A.B.C did not align quite correctly either on it. When I stacked it on top of an official cummins damper and aligned the pin position marks,... all three A,B,C were off by a few degrees.






--- and don't even get me started on their garbage overhaul kits.

Good to know Rawze, thank you! I do agree that I wouldn't put on an off brand dampner or other critical engine component. I have never used a non-cummins OEM part, but I figured for the 50% savings I'd give this a shot and see how it does, we shall see.