(06-02-2021 )armana87 Wrote: Hey Everyone! Im new on here and just got my first freightliner with a cummins ISX 15 :))
First off, does anyone know how to check my boost pressure? I hook up insite but dont know how to check the psi.
I had someone that is "well known" to a delete because i kept getting these sensor codes and after that, the truck was smoking from exhaust so i went ahead and blocked off what needed to be done, after that smoke went away.
The thing that makes me a little nervous is that before the delete, when i would start her up, the turbo would be whistling loud at idle and had a lot of power, now after this, the turbo sound is much much less and the power is just not there. Well the power wasnt there and then i let her idle for a good thirty minutes and tried her again and it was full of power. Im not sure if there is anyway to check these, but i have a Nexiq, TV, and necessary software to do my own diagnostic but this type of stuff is just out of my knowledge base because i dont know what settings or files were put on this truck.
I am willing to pay for someone to look it over for me, and i did read the whole delete page and wasnt expecting this from someone known out of Canada.
Please do not think of doing anything different than what Rawze has told you. Rawze took care of my engine over a year ago. I followed every direction he told me, EXACTLY. It wasn't an easy process for me, but it was worth every difficulty faced.
