Threaded Mode | Linear Mode

Nhramember · 02-16-2024, **(Subject: I have a question about doing the bottom end. )**

What is the best oil pump besides Cummins on the market? I know I can do oem but checking for rod bearings and main bearings since I just hit the 1 million mark on my 2015 kw t680. I wanted to get here and did now I wanna do a new oil pump and the bottom end. Thanks everyone

Nilao · 02-16-2024, **(Subject: I have a question about doing the bottom end. )**

OEM only on internal parts. That is the only answer you will get from the reputable people here. That is one place you don't want to skimp. Something non-critical like a tensioner, belt, etc I would go with aftermaket.

Pd6cas2 · 02-16-2024, **(Subject: I have a question about doing the bottom end. )**

Rawze will have a fun answering this :-)
Stop trying to save a nickel to spend a dollar later.
Replace oil pump OEM and Shim Correctly and make sure to double check of size bearing or mismatch.

Rawze · 02-16-2024, **(Subject: I have a question about doing the bottom end. )**

(02-16-2024 )Pd6cas2 Wrote: Rawze will have a fun answering this :-)
Stop trying to save a nickel to spend a dollar later.
Replace oil pump OEM SHIM. Correctly and make sure to double check of size bearing or mismatch.

I could not have said it better myself..lol