Metering actuator issue |
04-19-2024, (Subject: Metering actuator issue ) Post: #10 | |||
| |||
RE: Metering actuator issue It’s done it with multiple trailers. I did get some fuel on the connectors during the process but I sprayed with electrical cleaner before I reassembled and then today when I had things apart and was testing I put dielectric grease in each. I put 150 miles on it doing short loads before it finally started to act up again. For a moment I thought it was fixed. It never got bad enough to trigger a code. If they had more wire coming out of the harness I’d just put new plugs in for the actuators. I’m considering buying a used engine harness and trying that out User's Signature: 2010 kenworth t800 isx500hp cm871 13spd 3.55ratio | |||
04-19-2024, (Subject: Metering actuator issue ) Post: #11 | |||
| |||
RE: Metering actuator issue I did find a post on here for some replacement connectors for the actuators so I’m goin to try that first. https://rawze.com/forums/archive/index.p...-8675.html User's Signature: 2010 kenworth t800 isx500hp cm871 13spd 3.55ratio | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.