07-20-2017,
Hello,
I'm having this code come up, the manifold gauge shows under 0.
Here's some background:
1.) this sensor was replaced 5 months ago, has worked fine until now.
2.) went out, wiggled some wires, started up truck, manifold gauge works.
* still not sure if wiring is the issue.
3.) cleared codes, drove down the road for about 17 miles, code comes back, manifold guage goes to 0.
Should I be looking to just replace the sensor AGAIN, or should I be looking at wiring?
Also, would putting holes in the crankcase filter cause this without a custom tune? This was done recently after replacing the filter recently, but ran fine for awhile after.
Any help is appreciated. Thanks!
I'm having this code come up, the manifold gauge shows under 0.
Here's some background:
1.) this sensor was replaced 5 months ago, has worked fine until now.
2.) went out, wiggled some wires, started up truck, manifold gauge works.
* still not sure if wiring is the issue.
3.) cleared codes, drove down the road for about 17 miles, code comes back, manifold guage goes to 0.
Should I be looking to just replace the sensor AGAIN, or should I be looking at wiring?
Also, would putting holes in the crankcase filter cause this without a custom tune? This was done recently after replacing the filter recently, but ran fine for awhile after.
Any help is appreciated. Thanks!