This is on a log truck, it gets worked pretty hard. Do you happen to have any pictures of your cracked housing?
(08-09-2019 )tree98 Wrote: [ -> ]This is on a log truck, it gets worked pretty hard. Do you happen to have any pictures of your cracked housing?
Gonna have to go looking. I thought I posted them in my thread
(08-10-2019 )tree98 Wrote: [ -> ]I didn't see any
I threw the cracked housing away when I moved in the spring, so this is all I have for pics...
[
attachment=5281]
This was clearly a crack, but I couldn't find a penetration to the oil rifle. There was obviously a leak directly from the oil rifle cavity somewhere, but I could pinpoint it. The leak increased dramatically from a sweat to a leak when I shimmed my oil pump, so it was rather conclusive that was where it had to be coming from. I inspected the gasket, the housing, and the block and could not find a stain showing where the gasket was leaking.
Starlight stopped by my shop when I was just finishing up, and he agreed that it didn't appear that my gasket had failed, so I'm fairly certain it leaked via the cracks.
[
attachment=5282]
[
attachment=5283]
Not all of these ^ are cracks, but it shows the poor quality of this particular casting IMHO.
[
attachment=5284]
This was a distinct crack. It was visible both front and back, straight horizontal from the bolt hole going right.
Wow, I hope I don't run into this. Mine isn't leaking yet so maybe there is hope.
(08-11-2019 )tree98 Wrote: [ -> ]Wow, I hope I don't run into this. Mine isn't leaking yet so maybe there is hope.
I'm sure you're fine.
I'm quite certain I know exactly when this happened:dodgy:
There's an
over beer story about it...you're in PA right?
(08-11-2019 )Hammerhead Wrote: [ -> ]...
There's an over beer story about it...you're in PA right?
I wonder when your going to come this way for a week or so?. You have been saying it for years now.
yes hammer, when you going to go see rawze?