(09-08-2019 )flatbed94kid Wrote: [ -> ]Maybe i'm thinking of something different but isn't their a linkage with holes and that is what you adjust it with on some models?
Are you able to match the position of the old one to new one?
I replaced one on my truck and it just bolted on.
Some are rubber eyelets with a rod and hose clamps on the rubber. Always good to be in spec for driveline sake.
Option 9. Park on a flat surface and adjust leveler for the 5th wheel height you want. Don't stretch the bags. Then go to a frame shop that does drivelines and have the angles measured from the transmission to the rear axle. Numbers go in software abracadabra update shims.
[
attachment=5451]
FBK, where the valve bolts on , one of the 2 holes are slotted in order to achieve the proper height.....just in case you missed it.