CM2250 gear lube reccomendation - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: ISX Related Help (/forumdisplay.php?fid=68) +--- Thread: CM2250 gear lube reccomendation (/showthread.php?tid=2209) Pages: 1 2 |
RE: CM2250 gear lube reccomendation - rrod - 11-22-2018 (10-06-2017 )Rawze Wrote: If you want to be anal about it,.. the sta-lube GL-4,.. if not,.. the super-tech. Myself, i buy the sta-lube by the case when it is on sale somewhere, but the super-tech when not, I was in a Walmart were the super-tech they had was only GL5. Is that ok for a demandated 2350 ? RE: CM2250 gear lube reccomendation - Rawze - 11-23-2018 (11-22-2018 )rrod Wrote:(10-06-2017 )Rawze Wrote: If you want to be anal about it,.. the sta-lube GL-4,.. if not,.. the super-tech. Myself, i buy the sta-lube by the case when it is on sale somewhere, but the super-tech when not, I use the sta-lube GL-4 most of the time. The walmart (super-tech) 80-90 GL-5 is what I alternatively use. RE: CM2250 gear lube reccomendation - flatbed94kid - 11-23-2018 (10-06-2017 )JMBT Wrote: Ok, I just finished re-reading Rawze's thread about gear lube. I demandated a few months back and have changed the oil 3 times in the last 30K to try and clean out all the soot from 600,000 miles of EPA ignorance. Now the oil is clean as a whistle and I will go back to 15-18K intervals. Now that the engine is cleaner inside I am ready to start adding some gear lube for the added benefits Rawze has spoke of. I just poured some 85w 140 supertech from walmart in mine today. Pretty thick stuff. RE: CM2250 gear lube reccomendation - flatbed94kid - 11-23-2018 far as I know the gear lube is also good to help protect the camshaft as they can get eaten away if no overhead valve adjustment hasn't been done properly as well |