Detroit 60 misfire need help - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: CAT, Detroit, and Other engine related Help... (/forumdisplay.php?fid=72) +--- Thread: Detroit 60 misfire need help (/showthread.php?tid=2576) |
RE: Detroit 60 misfire need help - Brock - 01-08-2018 Well there we have it, swapped injector #1 and #6 and the problem followed. For some reason number 2 is now just as low as the bad one, well see when I put it all back together good. RE: Detroit 60 misfire need help - Mr Hagg - 01-09-2018 Maybe due to #1 pumping air back into fuel system makeing # low. Make sure you replace the injector orings. RE: Detroit 60 misfire need help - DUKE58 - 01-09-2018 (01-08-2018 )Brock Wrote: Changed fuel filter and got the engine nice and warm, ran test 3 times and each time was similar to this.maybe this can help on my Detroit I had a bad misfires it was wire harness for injector RE: Detroit 60 misfire need help - Brock - 01-09-2018 Got it fixed. Swapped out the injector and now they are all showing great. Trucks never ran so smooth. Thanks for the help! RE: Detroit 60 misfire need help - Brock - 01-09-2018 -20 degrees Celsius and here I am on the road right in front of the western star dealership swapping a injector haha RE: Detroit 60 misfire need help - MommaBurt - 01-09-2018 So it was just a bad injector then? RE: Detroit 60 misfire need help - trucklogger2 - 01-09-2018 (01-09-2018 )Brock Wrote: -20 degrees Celsius and here I am on the road right in front of the western star dealership swapping a injector haha Fu$#in eh! RE: Detroit 60 misfire need help - the missing link - 01-09-2018 Get-er her done ... Right on man I wish I could say I never wrenched on my back in a snow bank before ,lol RE: Detroit 60 misfire need help - Rawze - 01-10-2018 Had to lay in the sopping cold mud once for several hours under the front of my truck with it pouring rain trying to find a short in the headlight harness under the front end. - I was cursing, and ripping wiring harnesses apart and cursing more.. Cold, soaked to the bone, rain pouring into my eyes and face, mud in my ears, and late for a delivery at that point. Sometimes you just gotta get s$it done so that you can get down the road again. |