+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: CM570 Cams (/showthread.php?tid=2943)
RE: CM570 Cams - Pd6cas2 - 04-01-2018
Quote:
RE: CM570 Cams - Pd6cas2 - 04-01-2018
Liners and counterbores at .12
RE: CM570 Cams - Pd6cas2 - 04-01-2018
Almost ready to start up
RE: CM570 Cams - serv - 04-01-2018
(04-01-2018 )Pd6cas2 Wrote: Almost ready to start up
Looks like a nice job, congrats! Do you live in the RGV or just buy your parts there? I live in Harlingen and have a yard in Donna, Tx and one in Laredo. 2 million miles, wow. Any info on the amsoil program that you mentioned above?
RE: CM570 Cams - Five Star - 04-01-2018
Great info and great pics as well! Yeah the shop has all correct tooling for critical parts. Any thought on an actual “break in” oil, or just Rotella 15-40? My next question would be, would a guy start it out on gear lube regiment, or wait a oil change or two?
RE: CM570 Cams - Pd6cas2 - 04-01-2018
I live 30 miles north St Paul,Mn.
I go to the Valley 11 months out of the year.
Amsoil is not the reason for long engine life,they happen to headquartered right up the Road.
They do my samples and I get results in 48 or less .
Engine was inframed before at 500k,
RE: CM570 Cams - Pd6cas2 - 04-01-2018
I do have Amsoil Oil bypass system but not for extended oil drains.
RE: CM570 Cams - Rawze - 04-01-2018
(04-01-2018 )Pd6cas2 Wrote: Liners and counterbores at .12
top of that deck looks a little rough for my tastes. Otherwise, lookes good.
RE: CM570 Cams - Pd6cas2 - 04-01-2018
Cummins tech says hes working on N14 nonstop.
Guys are buying from salvage yards and when putting together Block deck is too pitted or Counterbores too off...