+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: CM870 just went through 15gallons of oil in 1 week! (/showthread.php?tid=2982)
RE: CM870 just went through 15gallons of oil in 1 week! - chuy - 04-23-2018
Got me a spun injector cam bearing!
Broken ring
[/quote]RE: CM870 just went through 15gallons of oil in 1 week! - chuy - 04-23-2018
These are some prices I got on Genuine Cummins parts so far:
NEW Head, Cylinder 5413782 - $3,925
Overhaul Kit 4376175 - $4,037
Injector Camshaft 4101432 - $1,625
Any input if on prices? Too high? Average? Any tips on where to go or who to talk to to get better prices?
Thanks guys
RE: CM870 just went through 15gallons of oil in 1 week! - Nilao - 04-23-2018
About average IMO. That piston also looks to have a hole in it...
RE: CM870 just went through 15gallons of oil in 1 week! - Chamberpains - 04-23-2018
I got nothing on prices. But im curious of the cause of a spun cam bearing? Never saw one that wasn't from a truck that wasn't dry started.
RE: CM870 just went through 15gallons of oil in 1 week! - chuy - 04-23-2018
(04-23-2018 )Nilao Wrote: About average IMO. That piston also looks to have a hole in it...
Aerodynamics? JK yea I see that. Guess I should consider myself lucky it made it to the shop under its own power
RE: CM870 just went through 15gallons of oil in 1 week! - Pd6cas2 - 04-23-2018
Chuy
Head over to French Ellison 'Kenworth' Pharr,Tx .
Talk to Javier Lopez..
RE: CM870 just went through 15gallons of oil in 1 week! - chuy - 04-23-2018
(04-23-2018 )Chamberpains Wrote: I got nothing on prices. But im curious of the cause of a spun cam bearing? Never saw one that wasn't from a truck that wasn't dry started.
It was leaking a tremendous amount of oil. So probably low oil when it started up sometime or while running. I mean a lot of oil like the title to this post says 17 gallons in the last week it was running crankcase pressure, blowby, and oil out of everywhere including oil dipstick.
RE: CM870 just went through 15gallons of oil in 1 week! - snailexpress - 04-24-2018
(04-23-2018 )chuy Wrote:Oil from everywhere because gases blown down around the piston. Why did you drove her leaking whole week? Truck isn't woman.(04-23-2018 )Chamberpains Wrote: I got nothing on prices. But im curious of the cause of a spun cam bearing? Never saw one that wasn't from a truck that wasn't dry started.
It was leaking a tremendous amount of oil. So probably low oil when it started up sometime or while running. I mean a lot of oil like the title to this post says 17 gallons in the last week it was running crankcase pressure, blowby, and oil out of everywhere including oil dipstick.
RE: CM870 just went through 15gallons of oil in 1 week! - chuy - 04-24-2018
(04-24-2018 )snailexpress Wrote:(04-23-2018 )chuy Wrote:Oil from everywhere because gases blown down around the piston. Why did you drove her leaking whole week? Truck isn't woman.(04-23-2018 )Chamberpains Wrote: I got nothing on prices. But im curious of the cause of a spun cam bearing? Never saw one that wasn't from a truck that wasn't dry started.
It was leaking a tremendous amount of oil. So probably low oil when it started up sometime or while running. I mean a lot of oil like the title to this post says 17 gallons in the last week it was running crankcase pressure, blowby, and oil out of everywhere including oil dipstick.
Lol. First time I have a driver it was his 3rd week. I think that explains it.