+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Reprogram issue :/ (/showthread.php?tid=5749)
Pages: 1 2
RE: Reprogram issue :/ - 2dlb - 02-05-2020
(01-30-2020 )Rawze Wrote: First thing I always do when someone comes over here is make a pdf document printout of the entire 'Features and parameters' settings that are showing in insite before making any kind of changes. Seen this happen too many times.
- as a last resort, you can pull the ecm off the truck, take it to the stealers%it and have them re-flash the ecm with the latest calibration and restore the original settings for your truck. - Usually costs a few hundred bucks.
I tried to do this, where can i find instructions on the procedure i have a file i would like you to look at.
Thanks
RE: Reprogram issue :/ - Rawze - 02-05-2020
(02-05-2020 )2dlb Wrote:(01-30-2020 )Rawze Wrote: First thing I always do when someone comes over here is make a pdf document printout of the entire 'Features and parameters' settings that are showing in insite before making any kind of changes. Seen this happen too many times.
- as a last resort, you can pull the ecm off the truck, take it to the stealers%it and have them re-flash the ecm with the latest calibration and restore the original settings for your truck. - Usually costs a few hundred bucks.
I tried to do this, where can i find instructions on the procedure i have a file i would like you to look at.
Thanks
just open up the 'features and parameters' section in insite, expand all, then print it out.
I think doing a complete ecm report, it is included as well.
RE: Reprogram issue :/ - Lonestar10 - 02-05-2020
In modern windows I have win 10 today you can "print to PDF" instead of an actual printer. And it will create a PDF of what you would have printed