+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Allison transmissions (/showthread.php?tid=7639)
Pages: 1 2
RE: Allison transmissions - Rawze - 08-11-2021
I hate Automatic trannies... Why not use a stick and be done with it.
RE: Allison transmissions - Ricky - 08-11-2021
(08-11-2021 )Rawze Wrote: I hate Automatic trannies... Why not use a stick and be done with it.
I have a bum left knee, my ProStar is automatic too. Besides I don't want to be holding my Proton Pack out the window trying to catch a ghost and have to reach over and shift.
RE: Allison transmissions - Ricky - 08-11-2021
(08-11-2021 )Nilao Wrote: My 5.9 Cummins (stock) in my 1 ton dually has had 3 transmissions in 140k miles. Unless you go with special bands you're not going to get long life out of one. The issue stems from the band material the use stick. They stretch the intermediate bands out to the point you can't adjust them anymore. So IMO the 47re and 48re are underbuilt for the power of the diesels.I have a good friend that has a 12 valve dodge dually 4x4 and he said Allison. I don't want to put a ton of money into a transmission.
I pull a 16k lb fifth wheel RV with it and after the last trans failure I spent the extra $ to have one custom built to my specifications.