+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Western Star DD15 To Cummins (/showthread.php?tid=8014)
Pages: 1 2
RE: Western Star DD15 To Cummins - Rawze - 03-23-2022
(03-22-2022 )Truckdriven Wrote: ...
the road speed governor is also enabled and locked and the owner wants It disabled because it doesn't let him get a run for hills
...
I will not help someone with this.. I do not contribute towards people driving their truck 80+ MPH and like a complete FOOL!
Tell that person to learn how to drive a damn truck properly and stop acting like an idiot.
RE: Western Star DD15 To Cummins - Truckdriven - 03-23-2022
(03-23-2022 )Rawze Wrote:I agree 80+ is certainly excessive but I(03-22-2022 )Truckdriven Wrote: ...
the road speed governor is also enabled and locked and the owner wants It disabled because it doesn't let him get a run for hills
...
I will not help someone with this.. I do not contribute towards people driving their truck 80+ MPH and like a complete FOOL!
Tell that person to learn how to drive a damn truck properly and stop acting like an idiot.
I can't set max speed higher than 70 with Insite, and it cuts power at 67, is this driving like a fool??
RE: Western Star DD15 To Cummins - Rawze - 03-23-2022
(03-23-2022 )Truckdriven Wrote:(03-23-2022 )Rawze Wrote:I agree 80+ is certainly excessive but I(03-22-2022 )Truckdriven Wrote: ...
the road speed governor is also enabled and locked and the owner wants It disabled because it doesn't let him get a run for hills
...
I will not help someone with this.. I do not contribute towards people driving their truck 80+ MPH and like a complete FOOL!
Tell that person to learn how to drive a damn truck properly and stop acting like an idiot.
I can't set max speed higher than 70 with Insite, and it cuts power at 67, is this driving like a fool??
e-mail me a copy of the program out of the truck (copied out with Calterm) and I will look at it to see if it is actually set that low.
RE: Western Star DD15 To Cummins - Rawze - 03-23-2022
(03-23-2022 )Truckdriven Wrote: I can't set max speed higher than 70 with Insite, and it cuts power at 67, is this driving like a fool??
In the program u sent me, the only thing set below 80+ mph (or higher) is the gear-down protection. It is set to allow an upper limit of 75 mph when not in top gear.
Maybe the ecm is unable to detect the tranny is in top gear?.. or maybe you are against an upper rpm limiter?.
RE: Western Star DD15 To Cummins - Rawze - 03-24-2022
This thread is continued in the "custom tuning" section ...
ref: http://rawze.com/forums/showthread.php?tid=8121&pid=70708#pid70708