Cm870 feels like it lacks power - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: ISX Related Help (/forumdisplay.php?fid=68) +--- Thread: Cm870 feels like it lacks power (/showthread.php?tid=8110) Pages: 1 2 |
RE: Cm870 feels like it lacks power - Redland1 - 03-26-2022 (03-23-2022 )Rawze Wrote:(03-22-2022 )Redland1 Wrote: 38 psi according to my Glowshift boost gauge when I’m loaded at 86,000lbs and the hammer down. 100 percent fueling.Picture is not so good but you can see the fuel percent and rail pressure. RE: Cm870 feels like it lacks power - Rawze - 03-26-2022 (03-26-2022 )Redland1 Wrote: 100 percent fueling.Picture is not so good but you can see the fuel percent and rail pressure. that is fairly useless info,...what you need to monitor is the actual mg/stroke that its pouring into the cylinders rating. RE: Cm870 feels like it lacks power - Redland1 - 03-27-2022 (03-26-2022 )Rawze Wrote:(03-26-2022 )Redland1 Wrote: 100 percent fueling.Picture is not so good but you can see the fuel percent and rail pressure. I don’t see that on my Insite.Where would I find it? My version is the pro and not pro plus. RE: Cm870 feels like it lacks power - Rawze - 03-27-2022 (03-27-2022 )Redland1 Wrote:(03-26-2022 )Rawze Wrote:(03-26-2022 )Redland1 Wrote: 100 percent fueling.Picture is not so good but you can see the fuel percent and rail pressure. Not 100% sure that Insite shows it... but I though I had seen it there before. You might need the other software to see it. ref: http://rawze.com/forums/showthread.php?tid=6641&pid=58693#pid58693 |