Rawze.com: Rawze's ISX Technical Discussion and more
No start after actuator and fuel shutoff solenoid replaced - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: No start after actuator and fuel shutoff solenoid replaced (/showthread.php?tid=4085)

Pages: 1 2 3


RE: No start after actuator and fuel shutoff solenoid replaced - Husky05 - 02-03-2019

(02-03-2019 )Rawze Wrote:  
(02-03-2019 )Husky05 Wrote:  ..
? It's a non VGT turbo.

bsides your other problems,... your engine has been butchered by some ignorant brain-dead moron!.


I am aware of that, I have spent a lot money correcting it. What's left to correct is put on vgt turbo and get coolant bypass for back of the engine. I have a vgt cal all ready to be put in once I get vgt in.

I just need to get this truck going again to get back on the road. It won't pull anything with how it's performing right now.


RE: No start after actuator and fuel shutoff solenoid replaced - Husky05 - 02-03-2019

Well I decided to clean out my old actuators and put them back in, truck runs awesome now. I am not sure which actuator it was. Going to replace one at a time and test run.