+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Turbo air filter.... (/showthread.php?tid=5091)
RE: Turbo air filter.... - DDlighttruck - 09-27-2019
(09-27-2019 )Rawze Wrote:(09-27-2019 )DDlighttruck Wrote: Swing and a miss. 110 psi going to that actuator circuit. Well, technically, it gets whatever the truck has for air, it went from zero to 110 as the truck built air back up
Put an adjustable regulator on it. Set it for 90 psi.
[attachment=5492]
One like that?
RE: Turbo air filter.... - Rawze - 09-27-2019
(09-27-2019 )DDlighttruck Wrote:(09-27-2019 )Rawze Wrote:(09-27-2019 )DDlighttruck Wrote: Swing and a miss. 110 psi going to that actuator circuit. Well, technically, it gets whatever the truck has for air, it went from zero to 110 as the truck built air back up
Put an adjustable regulator on it. Set it for 90 psi.
One like that?
yeah. Merik4792 put one on the supply line to the controller on his truck when he was here visiting and it did a world of good for it.
RE: Turbo air filter.... - DDlighttruck - 09-28-2019
(09-27-2019 )Rawze Wrote:(09-27-2019 )DDlighttruck Wrote:(09-27-2019 )Rawze Wrote:(09-27-2019 )DDlighttruck Wrote: Swing and a miss. 110 psi going to that actuator circuit. Well, technically, it gets whatever the truck has for air, it went from zero to 110 as the truck built air back up
Put an adjustable regulator on it. Set it for 90 psi.
One like that?
yeah. Merik4792 put one on the supply line to the controller on his truck when he was here visiting and it did a world of good for it.
Will do. Thanks
RE: Turbo air filter.... - DDlighttruck - 09-28-2019
[attachment=5500][attachment=5501][attachment=5502]
Fed regulated shop air to the system. The only leak was that fitting. Added a regulator, cut out the 1/4” line, new 3/8” line to a new fitting.
The trucks been shut off for around 5 minutes and the gauge still hasn’t moved. It’s a little crude but it’ll work for now I think
RE: Turbo air filter.... - DDlighttruck - 10-31-2019
[attachment=5667][attachment=5666]
Picked up my new actuator today. Came with new bolts, clip, cover and o-rings. About $575 CDN money
Gonna try to get it installed this weekend