+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: 870 broken exhaust manifold bolt (/showthread.php?tid=5241)
RE: 870 broken exhaust manifold bolt - DDlighttruck - 11-06-2019
(11-06-2019 )tree98 Wrote: I would have bought it if I snapped off a bunch of the bolts. Since I had just one to get out I decided against it. Truth be told I wish I would have just bought it. Good tools are expensive, that's just the reality.
Agreed.
Is Snap On for everyone? (Just an example)
No, but then again a buddy was in the middle of a brake job and broke a cheap 21 mm socket. My first question was who only owns one 21 mm socket
But then again I’ve witnessed a welded up 1-1/8” socket being used on axle flange nuts
RE: 870 broken exhaust manifold bolt - Pete1990 - 11-07-2019
(11-06-2019 )tree98 Wrote:(11-06-2019 )Pete1990 Wrote:(11-01-2019 )tree98 Wrote: What you guys think about this thing?
https://www.brokenbolt.com/cummins-isx-broken-bolt-demo.php
Its specifically for broken isx exhaust manifold bolts. I talked to the guy that makes them, he said it takes 8 minutes to drill a broken bolt out with this thing. He guarantees it to work, it's not cheap but either is a new head if you screw it up.
I Have this tool at the house. Paid the almost $800 for it and it worked like a charm. Set the drill bit stop so u don't drill to far and put a coil in the hole and ur done.
I would have bought it if I snapped off a bunch of the bolts. Since I had just one to get out I decided against it. Truth be told I wish I would have just bought it. Good tools are expensive, that's just the reality.
I Bought it for 1 bolt. After i did that job in my driveway i told myself never again. Did it in the winter when it was 0 outside Lol