+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Error 5081 (/showthread.php?tid=1383)
Error 5081 - Vulcantweet - 01-23-2017
Just purchased an 06 Volvo with a CM870. Trying to remove the 62 MPH road speed governor with Insite. Insite tells me the ECM has an invalid Footprint and must be recalibrated. Also says it was caused by a previous operation that left the ECM in an Invalid State.
This is the first time I've hooked up to this truck - used to be a "fleet" truck I believe.
Any thoughts? Or can anyone recalibrate this ECM?
Thanks
RE: Error 5081 - Rawze - 01-23-2017
(01-23-2017 )Vulcantweet Wrote: Just purchased an 06 Volvo with a CM870. Trying to remove the 62 MPH road speed governor with Insite. Insite tells me the ECM has an invalid Footprint and must be recalibrated. Also says it was caused by a previous operation that left the ECM in an Invalid State.
This is the first time I've hooked up to this truck - used to be a "fleet" truck I believe.
Any thoughts? Or can anyone recalibrate this ECM?
Thanks
Unilevers and/or gearhead are both very good with CM870.