+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: SOHC ISX overhead (/showthread.php?tid=1545)
SOHC ISX overhead - Liquidforce - 03-06-2017
Hi Guys,
I've watched rawze (and others) running an overhead on the earlier DOHC ISX, but wondering if there was a similar video out for running it on a later model SOHC? (Cm2250/2350)
Cheers
RE: SOHC ISX overhead - Hammerhead - 03-06-2017
(03-06-2017 )Liquidforce Wrote: Hi Guys,
I've watched rawze (and others) running an overhead on the earlier DOHC ISX, but wondering if there was a similar video out for running it on a later model SOHC? (Cm2250/2350)
Cheers
No difference. The 2250, 2350, and Rawze's instructional video of an 871...it's all the same, other than that you don't have to adjust the injector preload on a single cam.
So simply ignore the injector part, and follow the valve cam portion of the procedure.
RE: SOHC ISX overhead - Signature620 - 03-06-2017
And instead of removing the oil filler to bar it over, you just pop out the rubber plug in the gear cover.
RE: SOHC ISX overhead - Hammerhead - 03-06-2017
(03-06-2017 )Signature620 Wrote: And instead of removing the oil filler to bar it over, you just pop out the rubber plug in the gear cover.Thanks, I keep forgetting to tell people that difference...