+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Bypass oil filter systems (/showthread.php?tid=1865)
Pages: 1 2
RE: Bypass oil filter systems - Hammerhead - 06-30-2017
(06-29-2017 )Brock Wrote: I noticed that Donaldson make a "full flow" replacements for the isx. I was specifically looking for one to use in place of the half full flow and half bypass fleetguard that Cummins uses. I figure a good full flow paired with a oil bypass system like the dual filter amsoils would make for a happy engine.
Not sure about Donaldson, but I have cut open both Fleetguard and Baldwin and they both have the "two in one" system. Baldwin also lists it as a "Full Flow" so I would assume the same with Donaldson, but I don't know for sure.