+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Actuator abnormal update rate (/showthread.php?tid=1906)
Actuator abnormal update rate - Neflextrucking - 07-15-2017
Replaced my turbo, used my old VGT actuator which was in good shape. Installed it with insite passed calibration. After driving couple hours I keep getting a 2636 code stating abnormal update rate. Took it off and recalibrated again and same thing keeps happening. Is it a bad actuator or am I missing anything?
THANK ALL
RE: Actuator abnormal update rate - Nilao - 07-15-2017
Check the pins in the plug for dirt or corrosion. Make sure the female side pin is not spread to far out.
RE: Actuator abnormal update rate - Rawze - 07-16-2017
Check the connections. Make sure also that the wiring does not get close to the exhaust housing. it can get melted.