| Actuator abnormal update rate |
| 07-15-2017, (Subject: Actuator abnormal update rate ) Post: #1 | |||
| |||
| Actuator abnormal update rate Replaced my turbo, used my old VGT actuator which was in good shape. Installed it with insite passed calibration. After driving couple hours I keep getting a 2636 code stating abnormal update rate. Took it off and recalibrated again and same thing keeps happening. Is it a bad actuator or am I missing anything? THANK ALL | |||
| 07-15-2017, (Subject: Actuator abnormal update rate ) Post: #2 | |||
| |||
| RE: Actuator abnormal update rate Check the pins in the plug for dirt or corrosion. Make sure the female side pin is not spread to far out. | |||
|
| 07-16-2017, (Subject: Actuator abnormal update rate ) Post: #3 | |||
| |||
| RE: Actuator abnormal update rate Check the connections. Make sure also that the wiring does not get close to the exhaust housing. it can get melted. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.