INSITE - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: ISX Related Help (/forumdisplay.php?fid=68) +--- Thread: INSITE (/showthread.php?tid=263) |
RE: INSITE - allan82782 - 04-12-2016 (04-08-2016 )Jerzy609 Wrote: I need some help with this Insite. I ordered Insite 7.62 off of eBay and it arrived at my house about 10 days before I got home. I remember that I was supposed to send my pc-id back to the seller but I haven't been contacted back and eBay says the sellers store is closed because of difficulties. Idk know if I should just try to send it back and try to get reimbursed either thru the seller or eBay or if somebody can help me out with this. I had the same the issue until I bought insite fix software. If u can give me your picd I'll help you. Just sent me an pm. RE: INSITE - overshot - 04-13-2016 (04-12-2016 )jesse20 Wrote:(04-12-2016 )snailexpress Wrote: Ebaydoes anyone have the new 8.1 version of insite? on the inside page it appears i can just download it but how much would the license cost me?:s $600 RE: INSITE - mitchtazz - 06-18-2016 Lady told me it was $436, or close to it for the fleet version. Supposed to do everything but load calibrations. RE: INSITE - Dcolumbia - 08-20-2016 I got my inline 6 all installed, just need the {**Content removed by protection bot**- filesharing.}. Can some one PM me options that may exist? RE: INSITE - Vlad - 06-11-2017 Hi everyone! Which one inline 5 or 6 you would recommend to buy and use for CM871 2009 with software insite 7.6.2. Or your suggestions. Thanks! RE: INSITE - Signature620 - 06-11-2017 Either of those will be fine if you just plan on using Insite. If you plan on using software for OEM modules, ABS, gearboxes, etc then consider a Nexiq adapter. RE: INSITE - Vlad - 06-11-2017 Thanks Signature620! RE: INSITE - ktmaam - 10-09-2018 Can someone possibly help me out with the insite software as well? I have a 2012 cascadia with a cm2250, thank you in advance RE: INSITE - Chamberpains - 10-09-2018 What exactly do you need help with? |