Rawze.com: Rawze's ISX Technical Discussion and more
Turbo - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Turbo (/showthread.php?tid=2957)

Pages: 1 2 3 4


Turbo - Pirate31red - 04-03-2018

Will a turbo from a 2350 work on an 871


RE: Turbo - smorgan87 - 04-03-2018

871 turbo is a good bit bigger to provide more air to the lower compression engine.


RE: Turbo - smorgan87 - 04-03-2018

If im not mistaken unilevers put a 871 turbo on a 2250 or 2350 engine.


RE: Turbo - Rawze - 04-03-2018

(04-03-2018 )Pirate31red Wrote:  Will a turbo from a 2350 work on an 871

that would heavily depend on your goals and expected outcome.


RE: Turbo - Unilevers - 04-03-2018

actually i have done it. its weird and i wouldnt suggest it but i did do one 871 i put a 2350 turbo on it because the guy just happened to have it.

Putting a 871 turbo on a 2350 ive done lots of.

uni


RE: Turbo - Pirate31red - 04-03-2018

I only want to do it because I have one already I do have another correct turbo for the 871 but it leaks oil into the compressor side


RE: Turbo - Hammerhead - 04-03-2018

(04-03-2018 )Unilevers Wrote:  actually i have done it. its weird and i wouldnt suggest it but i did do one 871 i put a 2350 turbo on it because the guy just happened to have it.

Putting a 871 turbo on a 2350 ive done lots of.

uni

Are the 871 and 2250/2350 turbo mounting flange the same?
Or does the exhaust manifold need to be changed as well?


RE: Turbo - Unilevers - 04-03-2018

(04-03-2018 )Hammerhead Wrote:  
(04-03-2018 )Unilevers Wrote:  actually i have done it. its weird and i wouldnt suggest it but i did do one 871 i put a 2350 turbo on it because the guy just happened to have it.

Putting a 871 turbo on a 2350 ive done lots of.

uni

Are the 871 and 2250/2350 turbo mounting flange the same?
Or does the exhaust manifold need to be changed as well?

871 has bigger studs - there was some drilling done and custom work to accommodate it.


RE: Turbo - Rounded_nut - 04-04-2018

Unilevers, what was the reasoning behind it? Just curious.