Turbo
04-03-2018, (Subject: Turbo ) 
Post: #1
Turbo
Will a turbo from a 2350 work on an 871
replyreply
04-03-2018, (Subject: Turbo ) 
Post: #2
RE: Turbo
871 turbo is a good bit bigger to provide more air to the lower compression engine.
replyreply
04-03-2018, (Subject: Turbo ) 
Post: #3
RE: Turbo
If im not mistaken unilevers put a 871 turbo on a 2250 or 2350 engine.
replyreply
04-03-2018, (Subject: Turbo ) 
Post: #4
RE: Turbo
(04-03-2018 )Pirate31red Wrote:  Will a turbo from a 2350 work on an 871

that would heavily depend on your goals and expected outcome.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
04-03-2018, (Subject: Turbo ) 
Post: #5
RE: Turbo
actually i have done it. its weird and i wouldnt suggest it but i did do one 871 i put a 2350 turbo on it because the guy just happened to have it.

Putting a 871 turbo on a 2350 ive done lots of.

uni
replyreply
04-03-2018, (Subject: Turbo ) 
Post: #6
RE: Turbo
I only want to do it because I have one already I do have another correct turbo for the 871 but it leaks oil into the compressor side
replyreply
04-03-2018, (Subject: Turbo ) 
Post: #7
RE: Turbo
(04-03-2018 )Unilevers Wrote:  actually i have done it. its weird and i wouldnt suggest it but i did do one 871 i put a 2350 turbo on it because the guy just happened to have it.

Putting a 871 turbo on a 2350 ive done lots of.

uni

Are the 871 and 2250/2350 turbo mounting flange the same?
Or does the exhaust manifold need to be changed as well?


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply
04-03-2018, (Subject: Turbo ) 
Post: #8
RE: Turbo
(04-03-2018 )Hammerhead Wrote:  
(04-03-2018 )Unilevers Wrote:  actually i have done it. its weird and i wouldnt suggest it but i did do one 871 i put a 2350 turbo on it because the guy just happened to have it.

Putting a 871 turbo on a 2350 ive done lots of.

uni

Are the 871 and 2250/2350 turbo mounting flange the same?
Or does the exhaust manifold need to be changed as well?

871 has bigger studs - there was some drilling done and custom work to accommodate it.
replyreply
 Thanks given by: Hammerhead
04-04-2018, (Subject: Turbo ) 
Post: #9
RE: Turbo
Unilevers, what was the reasoning behind it? Just curious.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.