+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: INSITE / INLINE Compatibility (/showthread.php?tid=386)
INSITE / INLINE Compatibility - Signature620 - 05-02-2016
Hi, today I've been having issues with INLINE 6 and INSITE 7.5
The computer in question is using 7.5 so that I can keep the current PC date, and 7.5 does everything I need it to. Just as I connect to an ECM, INSITE crashes. I've got the latest INLINE drivers & firmware and the adapter is genuine and known to be working. Aside from trying a fresh install of INSITE I'm not sure what else to try. Any ideas anyone?
RE: INSITE / INLINE Compatibility - Alex - 08-22-2016
What differences between inline 5vs6?
RE: INSITE / INLINE Compatibility - dbl overdrive - 08-23-2016
There is a patch available so you don't have to mess with the date but you need to get it from a different site.
Rawze don't allow software swapping. Good luck.
RE: INSITE / INLINE Compatibility - Old Driver - 08-23-2016
On my truck the copper pegs from ecm plug were corroded from water and needed to be replaced. It would work for a few seconds but cut out and give fault code.
RE: INSITE / INLINE Compatibility - Signature620 - 08-23-2016
I worked the problem out and I'm using 7.6 now. I forgot to update the thread when I fixed it.