Threaded Mode | Linear Mode

Signature620 · 05-02-2016, **(Subject: INSITE / INLINE Compatibility )**

Hi, today I've been having issues with INLINE 6 and INSITE 7.5

The computer in question is using 7.5 so that I can keep the current PC date, and 7.5 does everything I need it to. Just as I connect to an ECM, INSITE crashes. I've got the latest INLINE drivers & firmware and the adapter is genuine and known to be working. Aside from trying a fresh install of INSITE I'm not sure what else to try. Any ideas anyone?

Alex · 08-22-2016, **(Subject: INSITE / INLINE Compatibility )**

What differences between inline 5vs6?

dbl overdrive · 08-23-2016, **(Subject: INSITE / INLINE Compatibility )**

There is a patch available so you don't have to mess with the date but you need to get it from a different site.
Rawze don't allow software swapping. Good luck.

Old Driver · 08-23-2016, **(Subject: INSITE / INLINE Compatibility )**

On my truck the copper pegs from ecm plug were corroded from water and needed to be replaced. It would work for a few seconds but cut out and give fault code.

Signature620 · 08-23-2016, **(Subject: INSITE / INLINE Compatibility )**

I worked the problem out and I'm using 7.6 now. I forgot to update the thread when I fixed it.