+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Things that may help others... (/forumdisplay.php?fid=46)
+--- Thread: Finally installed my bypass filter (/showthread.php?tid=429)
Pages: 1 2
Finally installed my bypass filter - Mrkentee - 05-14-2016
Initial start seems ok-no leaks. I really would like a ball valve where the pressure comes out, but it would have been so heavy. The line for this filter is a lot bigger than what was used for my big gulf coast filter on my last truck.
I'll probably be stopping every 5 miles to check it for the next 6 months.
RE: Finally installed my bypass filter - Mrkentee - 05-14-2016
[attachment=1507]
RE: Finally installed my bypass filter - Mrkentee - 05-14-2016
[attachment=1508]
RE: Finally installed my bypass filter - Mrkentee - 05-14-2016
[attachment=1509]
I attached it to my hose rack.
RE: Finally installed my bypass filter - Rawze - 05-14-2016
Looks pretty good.
RE: Finally installed my bypass filter - T680 - 05-16-2016
Good job, Did it too,Buț went The shorter route right there By The oil supply
In my custom oil hose shop those long Lines would be more than 250$
RE: Finally installed my bypass filter - Mrkentee - 05-16-2016
(05-16-2016 )T680 Wrote: Good job, Did it too,Buț went The shorter route right there By The oil supply
In my custom oil hose shop those long Lines would be more than 250$
I hear you. I would have liked to but couldn't seem to jam it in anywhere sensible. And with side fairings I couldn't put it halfway, rear of the steps.
RE: Finally installed my bypass filter - gearhead - 05-19-2016
It looks good bud.
RE: Finally installed my bypass filter - jorden486 - 06-13-2016
What do you figure your into that?