+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: 10 speed ??? (/showthread.php?tid=4302)
10 speed ??? - shawnkw - 03-17-2019
2011 kw 10 speed I had my clutch brake adjusted in Pennsylvania while I was up that way. Now I’m back in Florida and during my post trip I noticed this cable/linkage hanging down just in front of my bell housing. I’m guessing this is why my clutch brake isn’t working again. It grinds when I initially put it into gear. Any help would be appreciated. I’m in Jacksonville Florida. Thank you
Shawn
RE: 10 speed ??? - shawnkw - 03-17-2019
Also would like to point out that you can see where it was going through a grommet through a plate on the front of the bell housing. Yes I’m new here and haven’t made many post but have lurked for a while.
Thank you
RE: 10 speed ??? - Rockhwy - 03-17-2019
That is the remote grease line to throw out bearing they took it off or it broke from when they took inspection cover off to adjust clutch, that's what I think it looks like to me anyway
RE: 10 speed ??? - shawnkw - 03-17-2019
10-4 thank you driver. It was dark by the time I got back to it. I’ll take off the inspection cover tomorrow and take a better look.
Thank you
RE: 10 speed ??? - hosetrucking - 03-19-2019
I thought the same thing as what rock Highway said. It looks like it's the remote Grease hose for your throwout bearing