Rawze.com: Rawze's ISX Technical Discussion and more
Isx cm2250 deleted have code SPN3058 Fmi 18 - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Isx cm2250 deleted have code SPN3058 Fmi 18 (/showthread.php?tid=4499)



Isx cm2250 deleted have code SPN3058 Fmi 18 - svraka - 05-07-2019

Hi I have Cummins ISX CM2250 with code SA 0 SPN 3058 FMI 18 truck it’s been deleted and already replaced Delta pressure sensor


RE: Isx cm2250 deleted have code SPN3058 Fmi 18 - Waterloo - 05-07-2019

Google says...

Blockage, restrictions, or leaks in the EGR differential pressure sensor ports
Leaking EGR valve
Stuck open EGR valve
Malfunctioning EGR differential pressure sesnor.

Maybe an EGR Tuneup is warranted?


RE: Isx cm2250 deleted have code SPN3058 Fmi 18 - Rawze - 05-07-2019

(05-07-2019 )svraka Wrote:  Hi I have Cummins ISX CM2250 with code SA 0 SPN 3058 FMI 18 truck it’s been deleted and already replaced Delta pressure sensor

who did the de-mandate?


RE: Isx cm2250 deleted have code SPN3058 Fmi 18 - svraka - 05-10-2019

Rawze that’s good question?As I know somebody from Davenport,IA


RE: Isx cm2250 deleted have code SPN3058 Fmi 18 - Lonestar10 - 05-11-2019

if it was demanded correctly there would be no EGR Dif alarms if im not mistaken. sounds like another truck that needs its program pulled/inspected and probably corrected by the real pros unless for some reason someone would leave the egr system on and only remove dpf.


RE: Isx cm2250 deleted have code SPN3058 Fmi 18 - Waterloo - 05-11-2019

(05-10-2019 )svraka Wrote:  Rawze that’s good question?As I know somebody from Davenport,IA

Get the truck to Atlanta and let Mr Hagg fix it, before you need to in frame it. Hopefully there is something left to work with. Probably did a poor job on the cans, if they did anything at all to them.


RE: Isx cm2250 deleted have code SPN3058 Fmi 18 - Rawze - 05-11-2019

(05-10-2019 )svraka Wrote:  Rawze that’s good question?As I know somebody from Davenport,IA

get the program copied out of the ecm and e-mail it to me for an inspection. that would be my first recommendation. Until you can verify the integrity of the programming, your pissing in the wind and potentially driving an engine hell bent on destroying itself.


RE: Isx cm2250 deleted have code SPN3058 Fmi 18 - svraka - 05-14-2019

(05-11-2019 )Rawze Wrote:  
(05-10-2019 )svraka Wrote:  Rawze that’s good question?As I know somebody from Davenport,IA

get the program copied out of the ecm and e-mail it to me for an inspection. that would be my first recommendation. Until you can verify the integrity of the programming, your pissing in the wind and potentially driving an engine hell bent on destroying itself.

Ok I will do that